Filters for Inogen One Oxygen Concentrators

Inogen One Oxygen Concentrator Filters including Particle Filter, Output Filter and filter kits. Oxygen Concentrator Filters from the manufacturer of the Inogen One G1, G2, G3, and At Home Oxygen Concentrators.

RP-101 Inogen One "G1", G2 & G3 Concentrator Output Filter

• Output Filter for the Inogen One Series Concentrators.
• Location: behind the removable cannula nozzle fitting.
• Easy to insert and remove.
• Output Filter should be replaced annually.
• Output Filter protects oxygen therapy patient from inhaling small particles.
• HCPCS code: E1399

RP-102 Inogen One "G1", G2 & G3 Concentrator Output Filter Wrench

• Wrench used for installation of Output Filter for the Inogen One Series Concentrators.
• Easy to use.
• Output Filter should be replaced annually.
• Output Filter protects oxygen therapy patient from inhaling small particles.

RP-107 Inogen One "G1", G2, & G3 Concentrator Output Filter Kit

• Includes two Output Filters and one wrench.
• Easy to insert and remove.
• Output Filter should be replaced annually.
• Output Filter protects oxygen therapy patient from inhaling small particles.
• HCPCS code: E1399

RP-200 Inogen One G2 Concentrator Particle Filter

• Particle Filter for the Inogen One air intake.
• Location: intake port.
• Easy to insert and remove.
• Particle Filter should be cleaned at least weekly.
• Clean Particle Filter with a mild liquid detergent. Rinse filter in water and air dry completely before reuse.
• HCPCS code: E1399

RP-300 Inogen One G3 Concentrator Particle Filter

• Particle Filter for the Inogen One air intake.
• Location: two intake ports on front of oxygen concentrator.
• Easy to insert and remove.
• Particle Filter should be cleaned at least weekly.
• Clean Particle Filter with a mild liquid detergent, rinse in water, and air dry completely before use.
• HCPCS code: E1399.

RP-400 Inogen One At Home Concentrator Particle Filter

• Particle Filter is eco-friendly and is designed to keep dust, pet hair, and other air-borne contaminants away from your oxygen.
• Location: intake housing.
• Washable and reusable.
• Easy insertion and removal.
• Particle Filter should be cleaned at least weekly and replaced when non-functional.
• Clean Particle Filter with a mild liquid detergent. Filter should then be rinsed in water and air dried before re-using.
• Particle Filter protects the oxygen concentrator from dust and other small particles.
• HCPCS code: E1399.

RP-401 Inogen One At Home Concentrator Intake Filter

• Particle Filter protects your concentrator from airborne contaminants.
• Location: top of concentrator, backside.
• Life expectancy is 5 years +/-.
• May require tool of removal and insertion of new filterl.
• Particle Filter should be cleaned at least weekly and replaced when non-functional.
• It is not intended for user to change this filter, as it is tightly seated on the concentrator, but is possible if necessary.
• Filter must always be in place at the top of the concentrator during operation.
• Concentrator will indicate a low priority error for "service needed" at time of necessary replacement.
• HCPCS code: E1399.

Vitality Medical is an Inogen Authorized Reseller. Other replacement parts for Inogen One concentrators may be viewed at Inogen Replacement Parts and Accessories.